www.kodak.com/go/docimaging
104 of 144
4. Click
OK
to complete the Restore Default function.
Scanner Counter
The User Utility scanner counters can be used to keep records of the number of documents scanned. The
counters also provide a reminder for roller cleaning and parts replacement.
System
Displays the number of pages scanned in ADF mode after the last counter update.
Flatbed
Displays the number of pages scanned in flatbed mode after the last counter update.
The User Utility will display the correct number of pages scanned in flatbed mode just after the
scanner operation. However, the number of pages is displayed in round numbers after the scanner’s
power is turned off and on. For example, the counter indication just after scanning 48 pages will be
48; the counter indication for the same number of pages just after turning the scanner off and on will
be 40.
After Clean Roller
Displays the number of pages scanned after the rollers were last cleaned. When the After Clean
Roller number is greater than the Warning number listed next to the counter, the rollers need to be
cleaned. (The Warning number indicates how many pages can be scanned after roller cleaning
before the rollers will need to be cleaned again.)
After Replace Roller
Displays the number of pages scanned after the rollers were last replaced. When the After Replace
Roller number is greater than the Warning number listed next to the counter, the rollers need to be
replaced. (The Warning number indicates how many pages can be scanned with a new set of rollers
before the rollers will need to be replaced.)
Update All Counter
Click the
Update All Counter
button to update the counter displays to the latest numbers. Document
scanning operations DO NOT automatically update the counter displays.
Clear Counter Buttons
There are two Clear Counter buttons, one to clear the After Clean Roller display and one to clear the
After Replace Roller display.
•
After you clean the rollers, click the
Clear Counter
button for After Clean Roller and reset the
number to zero.
•
After you replace the rollers, click the
Clear Counter
button for After Replace Roller and reset
the counter to zero.
