Quick Reference Guide
KODAK Personal Picture Maker 215
7
Additional rights
Some states do not allow limitations on
how long an implied warranty lasts, or do
not allow the exclusion or limitation of
incidental or consequential damages. If
such laws apply, the limitations or
exclusions contained in this statement
may not apply to you.
This warranty gives you specific legal
rights. You may also have other rights
which vary from state to state.
Electronic emission
notices
Federal Communications
Commission (FCC)
Compliance Information
Statement
Statement
The KODAK Personal Picture Maker 215,
Type 4103-P01 has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
The FCC Class B limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult your point of purchase or
service representative for additional
suggestions.
The manufacturer is not responsible for
any radio or television interference
caused by using other than recommended
cables or by unauthorized changes or
modifications to this equipment.
Unauthorized changes or modifications
could void the user's authority to operate
this equipment.
To assure compliance with FCC
regulations on electromagnetic
interference for a Class B computing
device, use a properly shielded and
grounded cable USB cable. Use of a
substitute cable not properly shielded and
grounded may result in a violation of FCC
regulations.
Any questions regarding this compliance
information statement should be directed
to:
Director of Lab Operations
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
(859) 232-3000
Notices
Industry Canada Compliance
Statement
This Class B digital apparatus meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations.
Avis de conformité aux normes
d’Industrie Canada
Cet appareil numérique de la classe B
respecte toutes les exigences du
Règlement sur le matériel brouilleur du
Canada.
European Community
(EC) Directives
Conformity
This product is in conformity with the
protection requirements of EC Council
directives 89/336/EEC and 73/23/EEC on
the approximation and harmonization of
the laws of the Member States relating to
electromagnetic compatibility and safety
of electrical equipment designed for use
within certain voltage limits.
A declaration of conformity with the
requirements of the Directive has been
signed by the Director of Manufacturing
and Technical Support, Lexmark
International, S.A., Boigny, France.
This product satisfies the Class B limits of
EN 55022 and safety requirements of EN
60950.
Japanese VCCI notice
The United Kingdom
Telecommunications Act 1984
This apparatus is approved under the
approval number NS/G/1234/J/100003 for
the indirect connections to the public
telecommunications systems in the United
Kingdom.
Energy Star
The EPA ENERGY STAR Computers
program is a partnership effort with
computer manufacturers to promote the
introduction of energy-efficient products
and to reduce air pollution caused by
power generation.
Companies participating in this program
introduce personal computers, printers,
monitors, or fax machines that power
down when they are not being used. This
feature will cut the energy used by up to
50 percent. Lexmark is proud to be a
participant in this program.
As an Energy Star Partner, Lexmark
International, Inc. has determined that this
product meets the Energy Star guidelines
for energy efficiency.
Power supply
information
If your power supply fails, replace it with
the Lexmark replacement part.
Safety information
• If your product is NOT marked with this
symbol
, it MUST be connected to
an electrical outlet that is properly
grounded.
• The power supply must be connected
to an electrical outlet that is near the
product and easily accessible.
• Refer service or repairs, other than
those described in the operating
instructions, to a professional service
person.
• This product is designed, tested and
approved to meet strict global safety
standards with the use of specific
Lexmark components. The safety
features of some parts may not always
be obvious. Lexmark is not responsible
for the use of other replacement parts.
