Doing more with your camera
www.kodak.com/go/support
34
Taking pictures using the AF lock
For special situations where AF may not work (
1
Set the AE/AF Lock button to AF.
2
Place the framing marks on the main subject.
3
Press the AE/AF Lock button.
4
Recompose the picture and press the Shutter button
halfway
to lock the
exposure position.
5 Press the Shutter button completely down to take the picture.
NOTE: The AF lock function lets you release the Shutter button to recompose the picture.
Using the program button
You can program this button in Capture and Review. The button is a shortcut to your
favorite settings. For example, if you frequently adjust the White balance settings, you
can program this button to bring up the White balance sub-menu—no need to access
the menu to search for it. The Program button may be unavailable in some modes.
Press OK or Set.
In Capture or Review, press
Program to bring up a sub-menu.
(Press again to exit.)
1
2
3
to highlight a setting.
NOTE: The Program button
assignment is kept until you
change it in Setup menu or
reprogram it by holding the
Program button.
Program the button
To program the sub-menu that is
open on your screen, hold the
Program button 3 seconds.
