31
www.kodak.com/go/support
Doing more with your camera
1
Set the Drive mode to the desired option,
2
Press the Shutter button
halfway
to set the AE/AF.
3
For all settings, except Burst, press the Shutter button
completely down
to take
the picture.
For Burst settings, press the Shutter button
completely down
and hold it
. The camera stops taking pictures when you release the Shutter
button, all pictures are taken, or there is no more storage space.
NOTE: To cancel self-timer and shutter delay during countdown, press the Shutter button again.
NOTE: During Quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see
).
Last Burst
Flash forced off.
Camera takes a series of pictures while the Shutter button is
pressed. When the Shutter button is released, only the last 5
pictures are saved (4 pictures in RAW). (Capture an event
when the precise timing is uncertain e.g., a child blowing out
birthday candles.)
Exposure
Bracketing 3
Flash forced off.
Camera takes 3 pictures at intervals of 1/3, 2/3, and 1.0 EV.
Determine the best exposure level for your conditions based
on your evaluation of 3 pictures. Not available in TIFF.
For using exposure compensation with exposure bracketing,
see
.
Exposure
Bracketing 5
Flash forced off.
Camera takes 5 pictures at intervals of 1/3, 2/3, and
1.0 EV. Determine the best exposure level for your conditions
based on your evaluation of 5 pictures (not available in RAW).
For using exposure compensation with exposure bracketing,
see
Time Lapse
Camera takes specified number of pictures (2–99) at specified
intervals (10 seconds–24 hours; 60 seconds–24 hours in TIF
& RAW).
Drive mode
Description
