Quick Start Up
www.kodak.com/go/support
2
2
Quick Start Up
Camera
Operate the camera with the AC adapter or with 4 AA-size alkaline batteries (not
provided).
1
If you choose to use AA-size alkaline batteries:
a
Remove the screw on the back of the camera with a straight-blade screwdriver,
then remove the battery door.
b
Insert 4 batteries.
c
Place the battery door back on the camera, then secure with the screw.
2
Select a location for the camera that will best capture the baby.
CAUTION:
Strangulation Hazard–do not place the camera in the crib or
within 3 ft (1 m) of the baby.
3
Place the camera on a flat surface, such as a dresser or shelf. To mount the camera
on a wall,
see page 4
.
4
Connect the AC adapter with the longer cord to the back of the camera.
5
Plug the AC adapter into a standard electrical outlet, then secure the cord to the
wall using the mounting clips, if necessary.
6
Press the On/Off button for at least 2 seconds. The button glows when the camera
is turned on.
urg_01344.book Page 2 Wednesday, October 26, 2011 3:48 PM