Kodak KAI-2001, User Manual, Page: 11 / 30

M T D / P S - 0 7 1 5 R e v i s i o n 4 . 0
w w w . k o d a k . c o m / g o / i m a g e r s 5 8 5 - 7 2 2 - 4 3 8 5 F a x : 5 8 5 - 4 7 7 - 4 9 4 7 E m a i l : i m a g e r s @ k o d a k . c o m
P a g e 1 1 o f 3 1
IMAGE SENSOR SOLUTIONS
CONNECTOR ASSIGNMENTS AND PINOUTS
SMB Connectors J1, J2 and J3
The emitter-follower buffered VOUT_LEFT and
VOUT_RIGHT signals are driven from the Imager
Board via the SMB connectors J3 and J2,
respectively. VOUT_LEFT is the primary output
from the CCD; VOUT_RIGHT is only used when
the CCD is clocked in dual-channel mode.
Coaxial cable with a characteristic impedance of
75
Ω
should be used to connect the imager board
to the Timing Generator Board to match the series
and terminating resistors used on these boards.
J1 is an auxiliary SMB connector driven from a
relay. The relay switches between the
VOUT_LEFT and VOUT_RIGHT signals, allowing
one video connection to transmit either output.
Board Interface Connector J4
Pin Signal Pin Signal
1 N.C. 2 N.C.
3 AGND 4 AGND
5 IMAG 6 IMAGER_IN11-
7 AGND 8 AGND
9 IMAG 10 IMAGER_IN10-
11 AGND 12 AGND
13 IMA 14 IMAGER_IN9-
15 AGND 16 AGND
17 IMA 18 IMAGER_IN8-
19 AGND 20 AGND
21 IMA 22 IMAGER_IN7-
23 AGND 24 AGND
25 IMA 26 IMAGER_IN6-
27 AGND 28 AGND
29 IMA 30 IMAGER_IN5-
31 AGND 32 AGND
33 IMA 34 IMAGER_IN4-
35 AGND 36 AGND
37 IMA 38 IMAGER_IN3-
39 AGND 40 AGND
41 IMA 42 IMAGER_IN2-
43 AGND 44 AGND
45 IMA 46 IMAGER_IN1-
47 N.C. 48 N.C.
49 AGND 50 AGND
51 N.C. 52 N.C.
53 VMINUS_MTR 54 VMINUS_MTR
55 N.C. 56 N.C.
57 AGND 58 AGND
59 IMA 60 IMAGER_IN0-
61 -5V_MTR 62 -5V_MTR
63 IMAG 64 IMAGER_IN15-
65 AGND 66 AGND
67 IMAG 68 IMAGER_IN14-
69 +5V_MTR 70 +5V_MTR
71 IMAG 72 IMAGER_IN13-
73 AGND 74 AGND
75 IMAG 76 IMAGER_IN12-
77 VPLUS_MTR 78 VPLUS_MTR
79 N.C. 80 N.C.
Table 6: J4 Interface Connector Pin Assignments