Setting Up the Wireless (Wi-Fi) Connection
3
www.kodak.com/go/aiosupport
4. If the name of your network is:
5. If your network has security enabled, use the LCD keyboard to enter your security string.
6. When the confirmation message appears, press
OK
.
If the printer is successfully connected, the Wi-Fi status light should be on.
If you are unable to connect your printer, go to
www.kodak.com/go/inkjetnetworking
.
7. When the printer is successfully connected, install the KODAK All-in-One Printer Software on your
computer. Follow the on-screen instructions to complete your setup.
Connecting to a WPS wireless router
1. Press
Home
.
2. Press
to select
Network Settings
, then press
OK
.
3. With
WiFi Setup Wizard
selected, press
OK
.
NOTE: The Wi-Fi radio turns on automatically when you select Wi-Fi Setup Wizard.
4. With
WPS Connect
selected, press
OK
.
5. Select one of these two methods of connecting:
IMPORTANT:
Before you press
OK
on the printer, make sure you know where the router's button is, or where to
enter the generated PIN. If necessary, consult your Internet service provider or router
manufacturer’s documentation for more information.
6. When the confirmation message appears, press
OK
.
If the printer is successfully connected, the Wi-Fi status light should be on.
If you are unable to connect your printer, go to
www.kodak.com/go/inkjetnetworking
.
7. When the printer is successfully connected, install the KODAK All-in-One Printer Software on your
computer. Follow the on-screen instructions to complete your setup.
Listed
Not Listed
Press
to select your
network, then press
OK
.
Make sure your wireless router is turned on and within range. If your wireless
router does not broadcast its SSID:
a. Press
to select
Unlisted network
, then press
OK
.
b. Use the LCD keyboard to enter your network name.
c. Select
WEP
or
WPA/WPA2
as required for your network's security
setup, then press
OK
.
Pressing a Button
Entering a PIN
a. With
Push Button Configuration
selected, press
OK
.
b. Press or select the WPS button for your wireless router.
NOTE: You will have two minutes to press or select the
WPS button. It may be a button on the device or a
virtual button in the device’s software.
a. Press
to select
Generate WPS
PIN
, then press
OK
.
b. In your wireless router’s software,
locate the PIN screen.
c. Enter the PIN you received from the
LCD into the PIN screen.
