Kodak Ektapro 4020, Service Manual

Page: 30 / 136

OEM ACCESSORIES
COPYRIGHT
The adapter of this English company is only designed to use traditional AV cassette recorders. Cue pulses
recorded on the tape trigger the interface unit to generate digital commands to advance the EKTAPRO Projector.
It is an interesting feature that the adapter works either by plugging directly into the remote socket or works
remotely by additional use of the EKTAPRO IR Receiver. In this case the system can simultaneously used with
both the EKTAPRO IR Transmitter and the adapter. The adapter is powered by a 9 volt A PP3 battery.
The illustration (figure 2-20) shows both possibilities to run the Projectors.
IR-USE.
The advantage is that the Adapter and Projector can be separated. In addition, the use of the
EKTAPRO Remote Transmitter is possible without disconnecting the Adapter.
CABLE USE
If no IR receiver is available the Adapter can be plugged with the fixed installed cable to the remote socket.
EKTAPRO IR Receiver
figure 2-20
Service Manual SM 2547-1
03/98 2-16 Kodak AG, Stuttgart