Kodak Easyshare LS420, User Manual

Page: 39 / 90

29
Chapter 4
Running a Slide Show
Use the Slide Show feature to sequentially display your pictures and videos on
the camera LCD, on a television screen, or on any external display device
equipped with a video input (such as a computer monitor or digital projector).
NOTE: Ensure that the Video Out setting is correctly set to NTSC or PAL (
see
page 34 ).
To run the slide show on a television:
1 Connect the video cable from the video-out
port on the camera to the video-in port on
the television. (Refer to your television
User’s Guide for details on video-in setup.)
The camera LCD turns off; the television
screen acts as the camera display.
2 Proceed with the next section, Starting the Slide Show .
Starting the Slide Show
1 Turn the Mode dial to Review , then press the Menu button.
2
Highlight Slide Show , then press the Select button.
3
Highlight Begin Show, then press the Select
button.
Each picture and video is displayed once,
in the order in which you took them.
Then the camera returns to the Menu
screen.
4 To cancel the Slide Show, press the Select button.
NOTE: If you connect or disconnect the video cable while a slide show is
running, the slide show stops.
Video
out