35
Chapter 2
Setting Focus Zone
If you do not get the composition and focus results you want by using framing
marks (
page 19
), use the Focus Zone feature to select a large or a
concentrated area of focus.
NOTE: Focus Zone is available in Close-up and PAS modes.
1
In any Still mode, press the Menu button.
2
Press
to highlight Focus Zone
, then press the OK button.
3
Press
to highlight an option, then
press the OK button.
Multi-zone (default)
— evaluates 3
zones to give an even picture focus. Ideal
for general picture taking.
Center zone
—evaluates the small area
centered in the viewfinder. Ideal when
precise focus of a specific area in the
picture is needed.
4
Press the Menu button to exit the menu.
This setting remains until you change the
Mode dial or turn off the camera; or, if it
was set while in PAS mode, until you use
Reset (
page 36
) to return to the default
setting.
