Troubleshooting
www.kodak.com/go/support
45
Computer/connectivity problems
You cannot take a
picture
■
Turn the camera off, then on again.
■
Depress the shutter button all the way (
page 7
).
■
Insert a charged battery (
page 2
).
■
Wait until the ready light is green before attempting to
take another picture.
■
Transfer pictures to the computer (
page 42
), delete
pictures from the camera (
page 30
), switch image storage
locations (
page 23
), or insert a card with available
memory (
page 6
).
■
If the camera is in Favorites mode, turn the Mode dial to a
different mode.
If...
Try one or more of the following
The computer does
not communicate with
the camera
■
Turn on the camera.
■
Insert a charged battery (
page 2
).
■
Make sure the USB cable is securely connected on the
camera and the computer port (
page 42
).
■
Make sure the EasyShare software is installed (
page 35
).
NOTE: This camera is not supported by Mac OS 8.6 or 9.x. You may
capture pictures on a card, then use a card reader to transfer
them to the computer.
Slide Show does not
run on an external
video device
■
Adjust the camera Video Out setting (NTSC or PAL,
page 25
).
■
Make sure the external device settings are correct (see the
device’s user’s guide).
If...
Try one or more of the following
