Safety Instructions
Safety Definitions
•
Warning:
Statements identify conditions or practices that could result in
permanent personal injury.
•
Caution:
Statements identify conditions or practices that could result in
damage to your equipment.
Safety Symbols
Attention:
For information about use of a
feature, please refer to the
Reference Manual.
Warning:
Hot surface. Do not touch.
An arrow pointing to the lamp door on the projector.
Safety Terms:
•
Warning:
Don’t look directly into the lens when the projector is turned on.
•
Warning:
Don’t block ventilation openings.
•
Warning:
To replace the lamp, turn the display off and unplug the power cord.
To avoid burns, wait 30 minutes before opening the lamp door.
•
Warning:
Please use the power cord provided. Connect the power cord to a
receptacle with a protective safety (earth) ground terminal.
•
Warning:
Refer all service to qualified service personnel. Servicing your own
projector will void the warranty.
•
Caution:
Don’t set liquids on the projector. Spilled liquids may damage your
projector.
•
Caution:
Don’t place the projector on a hot surface or in direct sunlight.
•
Caution:
Do not drop the projector. Transport the projector in a Kodak-approved
case.
Using the Remote Control
For best results, point the remote directly at the projector.
Using the Keypad
While the menu is displayed, the volume, source, and standby buttons act as navigation
buttons. Use them to select menu items and move to different menus.
Turning Off the Projector
To completely turn off the projector, unplug it.
If you want to turn off the display for a short period of time, press the
button on the
keypad or remote.
DP2000 Digital Projector
EASTMAN KODAK COMPANY
Rochester, NY 14650
Kodak is a trademark of Eastman Kodak Company. © Eastman Kodak Company, 1999 Printed in the U.S.A. 8/99
Simulates the left
mouse button – use to
adjust settings
Standby – turns off the image
without turning off the projector
Computer – selects the
computer as the source
Simulates the right mouse button –
use to adjust settings
Menu – displays the menu
Disk Mouse – use to select
menus and menu items
Video – selects the video player
as the active source
Lamp on/off
Volume – increases volume
Standby – turns off the image
without turning off the projector
Menu button – displays a menu
of projector options on the screen
The Keypad
Volume – decreases
volume
Lamp LED
Source button –
toggles back and
forth between
video and
computer sources
009-0469-00