Kodak DirectView CR 500 System, User Manual

Page: 54 / 236

5-8 1F1976 August 1, 2003
Scanning, Viewing, and Managing Images
Working with Images
Reprocessing Images
You can modify images before you accept and route them. For information on
reprocessing previously delivered images, see page
6-1 . You can reprocess
the displayed image in several ways, including Edge Enhancement, Contrast,
Brightness, etc. To reprocess an image, select
Image Processing from the
Image Viewer screen.
Routing Images
When you route images in QA mode, you send them to the destinations set up
by the Key Operator, or you can select specific, pre-defined destinations.
– Use the Pan and Zoom features to evaluate images. Select ESC or
spacebar to return to normal view. See “Full Resolution Viewing” on
page 6-7 .
– Select Accept Image to send the image to the destination set up by the
Key Operator.
– Or, select Select Destination to send the image to specific destinations.