manualshive.com logo in svg

Kodak DIGITAL SCIENCE DC200, User Manual

Share
Download
Kodak DIGITAL SCIENCE DC200 User Manual Download Page 22

2-12

 

Batteries 

The DC200/DC210 comes with four AA batteries. Standard 1.5V alkaline, 1.5V 
lithium, or rechargeable 1.2V Ni-Cd or Ni-MH batteries may be used. 

The battery power icon changes automatically. You may not select or change 
this icon.

To install the batteries: 

Full—batteries are fully charged.

Low—batteries need to be replaced.

Blinking—batteries are insufficient to run camera and need to 
be replaced.

☞

Pictures on memory cards are not lost if batteries are depleted.

1

Place your thumb on the battery door.

2

Slide the battery door away from the camera.

3

Insert the batteries as indicated on the battery 
cover and close the battery door.

☞

Remove the batteries if the camera will not 
be used for an extended period of time. This 
extends battery life and prevents camera 
damage from battery leaks or corrosion. If 
the batteries are removed from the camera for 
more than a few minutes the date and time 
will be deleted and must be reset.

Summary of Contents for DIGITAL SCIENCE DC200




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands