5-14
April 29, 2004
Configuring your Camera
Saved Setups
You can do the following with saved setups:
• Load a setup from a memory card into camera memory
• Save a setup from camera memory to a memory card
• Delete setups from camera memory
Loading a Setup from a Card
You can load a setup from the root directory of a memory card into camera
memory. This setup might have been saved on your camera or on a
different DCS Pro SLR/n camera.
1. If there are ten setups saved in camera memory, delete one or more to
make room for the new setup (see
page 5-15
).
2. Insert the memory card containing the setting to be loaded (see
page 6-2
).
3. Choose User Setups from the Tools menu, then choose Saved.
4. Choose Load From Card, choose CF Card or MM Card, then choose
the setting to be loaded.
5. Press the OK button.
The setup is loaded into camera memory and the camera is
configured to that setup.
Saving a Setup to a Card
Once a setup is in camera memory, you can save it to a card.
1. Insert a memory card (see
page 6-2
).
2. Choose User Setups from the Tools menu, then choose Saved.
3. Choose Save to Card, then choose the setting to be saved.
4. Press the OK button.
The setup is saved to the card’s root directory.
