Kodak DC3400 - DC Digital Camera, User Manual

Page: 105 / 156

7
97
Serial ports are usually labeled COM1 and
COM2, or A and B. If your computer has a
25-pin port, you need to use a 9-pin
adapter (available at your local computer
store) and attach it to the port before
attaching the serial cable to the computer.
If the ports are not labeled, see your
computer User’s Guide for a diagram that
illustrates all of the external ports.
3
Open the serial/USB port door on the side
of the camera.
4
Plug the other end of the serial cable into
the camera serial port.
5
Slide the POWER switch to the right to turn
on the camera.
If you get a message on your computer
stating that you are not connected, refer to
the Serial.PDF document installed with the
software, or the online help for
troubleshooting information.