Troubleshooting
www.kodak.com/go/support
49
Camera ready light status
Picture is too dark.
■
Turn on the flash (
page 11
).
■
Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
■
Use Fill flash (
see page 11
) or change your position so light is not
behind the subject.
■
Increase Exposure Compensation (
page 14
).
Camera does not
recognize
SD/MMC card.
■
Purchase a certified SD/MMC card.
■
Reformat the card (
see page 39
).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■
Insert a card into the slot, then push to seat (
page 3
).
Camera freezes up
when a card is
inserted or
removed.
■
Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
Memory card full.
■
Insert a new card (
page 3
), transfer pictures to the computer
(
page 29
), or delete pictures (
page 19
).
Memory card and
internal memory
full.
■
Transfer pictures to the computer (
page 29
), then format the card or
internal memory (
see page 39
).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
If...
Try one or more of the following
Ready light does
not turn on and the
camera does not
work.
■
Turn on the camera (
page 2
).
■
Install new batteries (
page 1
) or charge rechargeable batteries.
■
Turn camera off, then back on.
If...
Try one or more the following
