background image

Setting Up the Printer

1-5

Turning On the Printer

Move the power switch to on ( | ).

On the operator panel, the orange Power light illuminates. If paper 
and ribbon are loaded, a Ready message appears.

To turn off the printer, move the power switch to off (

).

Handling and Storing the Paper and Ribbons

For the best quality prints, carefully handle and store the paper 
and ribbons.

• To avoid fingerprints, handle the photo ribbon by the spool 

ends. Handle the backprinter ribbon by the cartridge. Do not 
touch the ribbon material. Do not touch the glossy side of the 
paper.

• Store the paper and ribbons away from direct sunlight.

Loading the Ribbons

Loading the Photo Ribbon

Make sure you have a KODAK 7000 Print Kit 5R (sold separately) 
available. This kit contains the correct photo ribbon for your 
printer (see 

“Printer Supplies” on page A-2

).

1. Carefully open the top cover.

CAUTION:

The thermal head becomes extremely hot during normal 
operation. Do not touch it.

2. If you are replacing the photo ribbon, remove the used ribbon.

NOTE:  Images remain on the photo ribbon after printing. If you 

need to maintain confidentiality, dispose of the used 
ribbon appropriately.

Summary of Contents for Apex 7015

















































Reviews: