Troubleshooting
www.kodak.com/go/support
55
Direct printing (PICTBRIDGE enabled printer) problems
Picture is too dark
■
Reposition the camera for more available light.
■
Use Fill flash (
see page 12
) or change your position so light is not
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications, starting on
page 57
.)
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the framing marks turn green, press the Shutter
button
completely down
to take the picture.
■
In Program mode, adjust the Exposure Compensation (
see page 16
).
Picture is too light
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off (
see page 12
).
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications, starting on
page 57
.)
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the framing marks turn green, press the Shutter
button
completely down
to take the picture.
■
In Program mode, adjust the Exposure Compensation (
see page 16
).
Pictures that have
KODAK PERFECT
TOUCH Technology
applied (twice) are
of lower image
quality.
■
If PERFECT TOUCH Technology has been applied to a picture on the
camera, do not apply it again when the picture is on the computer
(or on a KODAK Picture Kiosk).
NOTE: PERFECT TOUCH Technology is automatically applied to Pictures
taken in Smart Capture mode.
Status
Solution
Cannot find the
desired picture
■
Use the Direct printing menu to change the image storage location.
Status
Solution