5
1. Plug the work light to a wall outlet and turn on the master switch at back.
2. Plug your device into the work light’s outlets or USB ports. Make sure your
devices are powered off before plugging into the outlets or USB ports.
3. When you have finished using the device, turn off your device and unplug it
from the work light.
Using the socket outlets and USB ports:
NOTE:
The Side LED Panel can be rotated horizontally (figure A). After expanding
the panel, it can be rotated vertically (figure B). The maximum horizontal rotation
angle is 180
⁰
, and the maximum vertical rotation angle is about 340
⁰
(pivot 170
⁰
backward and pivot 170
⁰
forward when the LED Panel is fully opened). Do not
over-rotate the hinge as it will damage the work light.
3. Plug the Work Light to a main socket, and turn on the master switch at the back.
4. You can control the light from the Light Control Switch.
figure A
figure B
