KODA AV-1300mkII, Instruction Manual

Page: 4 / 12

4
PC VIDEO CONSOLE TUNER DVD
FRONT
RIGHT
SPEAKER
FRONT
LEFT
SPEAKER
REAR
LEFT
SPEAKER
CENTER
SPEAKER
REAR
RIGHT
SPEAKER
1. Before starting the power, please connect the system properly according to chart from the next page. Pay more
attention to connecting the polarity correctly and turn the volume button to minimum position.
2. Please turn input selector button to correct position, then start the power, several seconds later, the amplifier
under normal working condition, you can enjoy music for suitable adjusting volume.
3. The power fuse is inside of the set, please ask the professional technician to change. The fuse tube should be
the same as before.
4. If the LED is not bright after starting the power, it means that the set is under abnormal condition, you should turn
off the power and resolve the trouble, then turn on the power again.
5. Using of MIC
1.) Insert MIC into „MIC 1” jack (8) and/or „MIC 2” jack (9), then adjust MIC volume knob (10) or (11), to make the
volume suitable.
2.) Adjust „echo” knob (7) to reach the good effect.
6. Start the playback on connected source devices (such as DVD) - your music will be played through the speakers.
Note! High volume levels can damage this amplifier or speakers. This may void your warranty.
Volume Regulator:
You can adjust the sound volume from minimum (the knob – max counterclockwise) to maximum (the knob – max
clockwise). Distortion and sound quality worsening may occur when the knob is in the maximum position. It may
damage the amplifier or speakers. This may void your warranty.
Bass Regulator:
You can adjust bass output of the amplifier. The default: the knob is in the center position: the marker on the knob in
the vertical position. Turn the knob counterclockwise (-) to decrease the amount of low frequencies. Turn the knob
clockwise (+) to increase the amount of low frequencies (+).
Treble Regulator:
You can adjust treble output of the amplifier. The default: the knob is in the center position: the marker on the knob in
the vertical position. Turn the knob counterclockwise (-) to decrease the amount of high frequencies. Turn the knob
clockwise to increase the amount of high frequencies (+).
Balance Regulator:
If the center of the soundstage is off-center, rotate the Balance Regulator knob in the direction that the soundstage
needs to be moved. The default: the knob is in the center position: the marker on the knob in the vertical position.