1. Communication with door camera.
(1) The visitor press the call button on the camera.
(2) The doorphone is ringing.
(3) Pick up the handset and starts communication with visitor.
(4) After communication, return the handset.
(5) In case, the internal call from extended monitor is made during
communication with camera, it is disconnected with camera automatically,
as the beep signal sounds in a sec, and makes internal call signal
Then it is connected to the monitor which makes the internal call.
2. Internal call and communication
(1) Pick up the handset and press button on the doorphone.
(2) The extended monitor or doorphone is ringing.
(3) Then, if the handset of the extended monitor is picked up, the internal
communication starts.
(4) In case the internal call is made from the extended monitor, pick up the
handset of the doorphone. Then you can starts internal communication.
(5) In case, the call is made from the camera during internal communication,
it is disconnected with extended monitor automatially, as the beep signal
sounds in a sec, and makes dingdong sound. Then connected with camera.
3. Door open
(1) Door lock should be equipped and connected with doorphone.
(2) Press button on the doorphone after communication, then the door
is automatically open.
Button
To call and
communicate with
other monitor or
doorphone
Power Lamp
To check power
ON/OFF status
��
Name of Each Part
Precautions for Operation
EXPANSION DOOR PHONE
(KDP-602G)
1.
As this device consists of precise electronic components, and high
voltage is generated internally, do not attempt to disassemble.
2.
Do not drop lndoor or outdoor station, and avoid strong impact.
3.
When cleaning, never use wet hands, volatile benzene or paint thinner.
4.
Keep away from humidifier and stove. High temperature and humidity
can cause malfunction
5.
Maintain the product clear by frequently cleaning doorstation with
soft cloths
6. Because this Door Phone is operated with only KVM-604,
KVM-524G & KVM-514G Video Door Phone, so when you use
with other product please install it after inquiry.
�
Doorphone
�
Wall hanger Pannel
�
Screw:3 x 12mm=2Pieces
∇
!
Description
KDP-602G
Electric source
DC 12
±
1V Only (From Monitor)
Power Consumption 1.6W(In Load)
Signal Sound
Electronic chime (Dingdong)
Wiring
3 Wired in polarity (KVM-604), Vcc/GND/Audio
4 Wire in polarity (KVM-524G, KVM-514G)
Vcc/GND/Audio/Interphone Vcc
Range
50m (
�
0.65mm)Max.
Intercom function
Only available with KVM-524G, KVM-514G
Button
Door opens when this
button is pressed.
Available only for the
door equipped with
door opener.
Volume
control
●
To control calling
signal volume.
��
Specifications
��
How to operate (Instruction for operating)
��
Component
DOORPHONE
KDP-602G USER’S MANUAL
Installation of DOOR PHONE
A- Choose a place on the wall where you want to hang the
DOOR PHONE.
B- Fasten the wall hanger on the wall.
C- DOOR PHONE can be hung on the wall hanger easily now.
��
Installation
