Power Lamp
Indoor station
Outdoor station
Door open
Handset
Installation
Specifications
How to operate (Instruction for operating)
Name of Each Part
Wiring Diagram
Component
Description KDP-601AM
KDP-601DM
Electric source AC 220V(only) or 110V(only)
BATTERY: DC 6V(4 Piece of 1.5V batteries)
LINE TERMINAL: DC 12V / 300mA
Consumption Un load: 0.5W Inload: 3.3W
Un load: 0.25mW Inload: 1.3W
Signal Sound Chime
Chime
Wiring 2Wired polarity
2Wired polarity
Range 300m(
�
0.65mm)
300m(
�
0.65mm)
�
Master station for indoor-use
�
Out door pannel
�
Wall hanger for master station
♪
♬
Pick up the handset and
communicate with a visitor.
After end of communication,
return the handset where it is
locked.
The indoor station
is ringing.
To release the door, press
the “Door open” button.
When a visitor
pushes the outdoor
station bell.
A - Choose a place on the wall where you
want to hang the Indoor station.
B - Fasten the wall hanger on the wall.
C - Indoor station can be hung on the wall
hanger easily now.
Installation of Indoor station
Installation of outdoor station
After attaching the body supporter with 2screws,
put the indoorstation into the grooves of body
supporter,and then fix it with screws.
Call Button
DS-2D
MS-2D
C-Mic
Speaker
Volume
Switch
Wiring Diagram
KDP-601AM
MS-2D or DS-2D
KDP-601DM
MS-2D or DS-2D
※
CAUTION
When DC 12V
Power line terminal
is used.
