Mini Dome Color Camera
Monitor screen can
’
t
be turned on
Images on monitor
screen isn
’
t clear and
image quality isn
’
t
good
Product Name
Model Name
Purchase Date
Terms of Warranty
Selling Agent Name
Selling Agent Address
1. Please pay great attention not to drop or give a strong impact to the camera when
installing, because it is made up of very elaborate components for reproduce of
clear image with high resolution.
2. Please avoid installing the camera at place on which sunlight directly shine lest
camera lens be exposed to direct ray of sunlight.
3. Please avoid installing the camera at place shake or sway frequently takes place.
4. Do not forcibly pull out cables. It may cause snapping of cables.
5. Do not open the case of camera even when camera is out of order.
Bring a camera to the nearest A/S center for repair.
6. Carefully install the camera to avoid water infiltration into it. In water infiltration,
please bring the camera to the nearest A/S center or selling agent for repair.
7. Temperature at installation place shall be within the range specified in product
specification.
8. When mechanical or functional troubles take place, first of all, cut off power
supply and then bring the camera to the nearest A/S center.
Continuous use even in troubles may cause more serious damages to the camera.
9. Before installing the camera, please check whether power supply is cut off and
grounding is carried out.
�
Check power connection is correctly made.
(DC12V / 300mA Adapter supplies power).
�
Check wiring is correctly performed.
�
Check lens focus is correctly set.
�
When a stained part is seen on monitor screen after
installation, clean up lens focus part of dome camera
with soft cloth to remove a stain.
Trouble
Check Items
※
Product design and specification subject to change or modification
for product enhancement without notice in advance.
Warranty
Warranty Card
Precautions in Installation
Installation
Please check before A/S request
www.kocom.co.kr e-mail:[email protected]
�
KOCOM Warranties the original purchaser of this product
as follows.
1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect, KOCOM
will repair it within one year from date of purchase free of charge.
3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment, by consumer.
b. Breakdown cause by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
KCC-D400 03.07
To receive after-Sale service, have the following ready when you
contact our branches
1. Name of the product
2. Model number of the product
3. The area of problem
4. Phone number and address at which you can be contacted.
KCC-D400
User’s Guide
※
This manual is based on the date as shown in the right and specifications
are subject to change without notice for quality improvement.
1. Pull out power and video cables
into installation place.
2. Attach mount angle on ceiling
using screws.
3. Fix camera on mount angle by
using screw lockup part on the
bottom side of camera.
4. Set up-down and left-right angles
of camera by unloosening screws.
After setting camera angles, fix
the camera by tightening up screws.
5. Put a dome cover.
6. Fix dome cover with cover ring.
Please be careful for dome cover
not to block camera lens.
7. After installing camera, connect it to
monitor and test real images on
monitor screen.
All manuals and user guides at all-guides.com
all-guides.com
