User manual
4/4
Settings
Switch on
•
Press the Function button
○
for approx. 8 until you hear
programming mode
a brief beep
•
The red and green LEDs will flash on the monitor
•
Programming mode switched on
Setting the ring tones
•
Switch on Programming mode (see above)
•
Press the Talk button
•
The red and green LEDs will flash on the monitor
Ring tone for Entrance 1 (AS 0)
•
Press the Unlock door repeatedly until you
hear the ring tone you require
Ring tone for Entrance 2 (AS 1-63)
•
Press the Talk button repeatedly until you
hear the ring tone you require
Ring tone for a Landing call
•
Press the Function button
○
repeatedly until you
hear the rig tone you require
Ring tone for Internal call
•
Press the Display button
□
repeatedly until you
hear the ring tone you require
Note
•
The ring tones can be set in succession
once the programming mode has been activated
Colour saturation adjustment
•
Switch on the programming mode (see above)
•
Press the Unlock button
•
The green LED will flash on the monitor
•
Using the Control buttons UP
and DOWN
adjust the
colour saturation to your liking
Brightness control
•
Switch on the programming mode (see above)
•
Press the Display button
□
•
The red LED will flash on the monitor
•
Using the Control buttons UP
and DOWN
adjust the
brightness to your liking
Switch off
•
If a button has not been pressed for 8 sec, the
programming mode
The programming mode will switch off automatically
•
A beep sounds; the red and green LEDs go out
•
Programming mode is switched off
Subject to technical changes
