Congratulations on your purchase of CMS5270----the 7.0 Inch Wireless Monitoring System with
OSD menu. The system consists of a 7.0” wireless monitor and a wireless color camera, an ideal
product for watching the baby, elder or patient. It is also suited for small business applications.
Features///
1). 2.4GHz wireless technology, 7.0-inch LCD for good picture display
2). Manual switch wired and wireless camera via pressing the button “Source”.
3). Supports up to 3 cameras and each camera’s motion can be armed or disarmed independently.
4). Friendly menu can adjust the alarm volume, contrast, brightness, color and tint.
5). LCD monitor can work with 3 modes: Scan, Auto & Manual
6). Selectable screen ratio of 4:3(std), 16:9(DVD movie) and extended 4:3.
7). Mirror function for vehicle rear view camera.
8). Up/down reverse function when monitor is installed upside down.
9). Optional rechargeable battery pack for both camera and monitor portable use.
10). LCD monitor can be wall or table mounting.
System Contents///
Identify all parts before proceeding with installation.
Things to Consider Before Installation/// For best performance, follow these simple guidelines:
*The camera should be aimed accordingly to optimize viewing area. *For best transmission, avoid
installations where there are thick walls or major obstructions between the camera & LCD
monitor.
Installing the Camera (Transmitter)///
1. Unpack the Camera.
2. The Pan&Tilt camera can only stand on desktop. So attach the camera to stand as shown. The
camera can be adjusted by rotating the camera head to the required position.
3. Use the camera power adaptor, connect power jack to the rear of the tabletop base. Make sure
the camera is within reach of an AC power outlet. Once it’s connected with the adaptor, the
camera will rotate one cycle.
4. After the camera rotate one cycle, press “Privacy” button, the lens will rotate to the lowest
position.
5. Select the camera operating channel on the DIP switch on the bottom panel by moving switches
1, 2 or 3 to the down position. Switch is preset to channel 1. 4. After the camera rotate one cycle,
press “Privacy” button, the lens will rotate to the lowest position.
