TDD
TDD
K06/0416
page 5
7. Electrical Connection
Attention! Make sure that the supply voltage of your system
correspond with the voltage of the measuring unit specified on the
nameplate.
•
Make sure that the electrical supply lines are de-energised.
•
Make the connection using the M 12x1 connector socket, as shown in the
accompanying diagram.
•
Appropriate connectors with different cable lengths are optionally available.
Attention! Incorrect wiring will lead to damage of the unit’s
electronics.
7.1. Connector pin assignment TDD-153, TDD-353
Option:
plug with cable ZUB-KAB-12K002
Plug
