Kobold AUF-1 series Operating Instructions Manual Download Page 3

  

AUF 

AUF K02/0516 

 

page 3 

2. Note 

Please read these operating instructions before unpacking and putting the unit 
into operation. Follow the instructions precisely as described herein.  
The devices are only to be used, maintained and serviced by persons familiar 
with these operating instructions and in accordance with local regulations 
applying to Health & Safety and prevention of accidents.  
 
When used in machines, the measuring unit should be used only when the 
machines fulfil the EU-machine guidelines. 
 
 
 

3. Instrument  Inspection 

Instruments are inspected before shipping and sent out in perfect condition.  
Should damage to a device be visible, we recommend a thorough inspection of 
the delivery packaging. In case of damage, please inform your parcel service / 
forwarding agent immediately, since they are responsible for damages during 
transit. 
 

Scope of delivery: 

The standard delivery includes: 

 Plug-On Display  model: AUF-1.../AUF-3.../AUF-4... 

  Operating Instructions  

 
 
 

4. Regulation  Use 

Any use of the Plug-On Display, model: AUF-..., which exceeds the 
manufacturer’s specification, may invalidate its warranty. Therefore any resulting 
damage is not the responsibility of the manufacturer. The user assumes all risk 
for such usage.  
 
 
 

Summary of Contents for AUF-1 series













Reviews: