III.- Electric Specifications
MODEL
VOLT
AMP
Hz.
WD-6K2
120V
7
60
WD-9K2
120 V
9
60
The vacuum cleaner has a polarized plug as shown in the figure.
An adapter can be used to connect to a
contact pin unpolarized.
The temporary adapter may be used only as a
qualified electrician install a polarized outlet
like the one shown in the figure.
IV.- How to change the pleated filter
1. Place the pleated filter into the cage, push
the filter in until it stops against the bottom
wall of the vacuum head.
2. Place the retainer over the filter.
3. Place the nut and tighten again.
4. Place the head in place and the vacuum
cleaner is ready for use.
8/10 MODIFICADO MAYO 2015.
