WARRANTY
This warranty gives you legal rights, and you may also have other rights which
vary from state to state. This products is warranted agains malfunctions and
defects in material and workmanship for a period of 1 year.
THIS WARRANTY SHALL NOT APPLY
To any products or parts thereof which have been damaged by tampering,
misuse or abuse or which have been altered or repaired by an unauthorized
person or service center. Once the device has protected equipment from
surges and protected light does not illuminate.
FOR REPAIR
The inoperative tablet power station must be delivered with shipping and
delivery charges prepaid, together with satisfactory evidence of the purchase
date to the dealer from whom it was purchased. Koblenz will either repair or
replace the unit at its election during the warranty period.
THE FOREGOING OBLIGATIONS ARE IN LIEU OF ALL OTHER OBLIGATIONS
AND LIABILITIES INCLUDING NEGLIGENCE AND STATE KOBLENZ’S
ENTIRE AND EXCLUSIVE LIABILITY AND PURCHASER’S EXCLUSIVE
REMEDY. KOBLENZ WILL IN NO EVENT, BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES WHATSOVER, AND KOBLENZ LIABILITY UNDER NO
CIRCUMSTANCES WILL EXEED THE CONTRACT PRICE FOR THE GOOD
OR PARTS FOR WHICH LIABILITY IS CLAIMED.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply
to you.
THORNE ELECTRIC, CO.
P.O. BOX 18363
San Antonio, TX.
78218-0363 U.S.A.
PH. (210) 590-1225
FAX. (210) 590-1258
Made in China
CONEXIÓN A LA LÍNEA ELÉCTRICA.
Conecte la clavija del supresor de picos a una toma de
corriente aterrizada de 120 V~, el botón se iluminará indicando
que el supresor está encendido.
Activación
1.
Luces Indicadoras
LED INDICADOR DE PROTECCIÓN.
Este led indica que todos los componentes de su supresor de
picos están funcionando correctamente, proporcionando
protección a su equipo. Si el led no enciende, indica que algún
componente del supresor se ha dañado, el supresor seguirá
funcionando, sin embargo, la protección es nula o limitada.
Debe llevar su supresor inmediatamente a un centro de
servicio autorizado Koblenz.
2.
CONNECT YOUR KOBLENZ SURGE SUPPRESSOR TO THE
AC POWER LINE, the light on the switch will turn on.
This Koblenz surge suppressor must be plugged into a 120
V~ grounded outlet. Grounding provides a path of resistance
for electricity to reduce the risk of shock.
Activation
1.
Diagnostic Indicator Lights
2.
PROTECTED LED.
When the green light is on it indicates that the surge suppres-
sor components are intact and providing complete protection.
If the light is not illuminated, some of the components are not
functioning and have to be replaced.
Contact a Koblenz authorized Service Center. You may still use
the unit. However, connected equipment will be protected
from spikes and surges at a lower level than normal.
Conexión de equipos
al supresor de picos
Conecte los equipos a su supresor de picos, incluso dispositi-
vos con enchufes de 2 alambres.
No conecte cables de extensión a esta unidad. No sobrecar-
gue el protector, la carga total de todos los contactos no debe
exceder de 10 A.
3.
Conexión a puertos USB
4.
Este modelo cuenta con tres puertos de alimentación USB de
2.1 A 5 Vcc en la parte lateral para alimentar o cargar sus
dispositivos USB móviles tales como reproductores de MP3,
teléfonos celulares inteligentes, etc.
Estos puertos son compatibles con la mayoría de los
dispositivos USB, sin embargo, para una mejor conectividad,
recomendamos preferentemente conectar sus equipos de la
siguiente manera:
Puerto USB A: compatible con dispositivos Apple
®
Puerto USB B: compatible con dispositivos Android™
Puerto USB C: compatible con dispositivos Apple
®
y
Android™
Nota: Algunos dispositivos requieren de una fuente de
alimentación USB propietaria o conectarlos directamente al
tomacorrientes.
Apple
®
es una marca de Apple Inc.
Android
™
es una marca de Google Inc.
Connect equipment to
your surge suppressor
3.
Your surge suppressor has an intelligent outlet design, both
transformers and standard plugs can be connected. Connect
the AC power cords of your electrical equipment including 2
wire devices.
Do not OVERLOAD the surge suppressor. Do not exceed a
total load of 10 A for all outlets.
USB-Charger
4.
This model has three 2.1 A 5 Vdc USB chargers located on the
side panel for conveniently powering / charging mobile USB
devices such as MP3 players, smartphones, etc.
These chargers support most USB devices, however, for
better connectivity, we preferably recommend connecting your
equipment as follows:
USB port A: compatible with Apple
®
devices
USB Port B: compatible with Android™ devices
USB Port C: compatible with Apple
®
y Android™ devices
Note: Some devices require a proprietary USB power supply
or connect directly to the outlets.
Apple
®
is a trademark of Apple Inc.
Android™ is a trademark of Google Inc.
Specifications
Model
Voltage
Frequency
Current
TPS-540 USB
120 V
~
60 Hz
10 A
Model
Outlets
USB
Charger
Joules
Protection
Noise
filtration
(EMI/RFI)
LEDS
TPS-540 USB
3
3
2.1 A 5 Vdc
540
30 dB
2
Protected
Grounded
Especificaciones
Modelo
Voltaje
Frecuencia
Corriente
TPS-540 USB
120 V
~
60 Hz
10 A
Modelo
Contactos
Cargador
USB
Protección
Joules
Filtro de
Ruidos
(EMI/RFI)
LEDS
TPS-540 USB
3
3
2.1 A 5 Vcc
540
40 dB
2
Protegido
Aterrizado
