4.- TO REPLACE RETRACTIL REEL (4)
4.1.- Follow steps 1.1, 1.2,2.2, 3.2 y 3.3
4.2.- Once disconected the harness and electronic panel of terminal's retractable reel (31) , release accesory
compartment , use flat blade screw driver, remove the cable entry (12) clamping bouncing staples to lower
part (13) release the screws securing the cable entrance
4.3.- Repleace retractil reel, placing all components on cavity like was initially placed
5.- TO REPLACE ELECTRONIC PANEL (31)
5.1.- Follow steps 1.1, 1.2, 2.2
5.2.- Disconect retractil reel terminals
5.3.- Replace electronic (31)
5.4.- Reassemble it was initially placed
6.- TO REPLACE THE SWITCH
6.1.- Follow steps 1.1, 1.2, 2.2
6.2.- Use a flat blade screwdriver to remove the cover's interruptor (4) disconect terminals ( make sure mark
the position like connected as)
6.3.- Replace the switch and Reassemble it was initially placed
NOTE:
WHEN ORDERING, DO NOT FORGET TO SPECIFY:
PART NUMBER
DESCRIPTION
MODEL NUMBER
3/12 Elaborated August 2013.
