kobi AF1200ESS, Instruction Manual

Page: 7 / 16

7
USING YOUR AIR FRYER
Before First Use
Before using your air fryer for the first time:
1 . Remove all packaging from your air fryer, including any temporary labels and stickers .
2 . Confirm that all of the accessories shown are included .
3 . Wash the accessories with warm, soapy water and a non-abrasive sponge . Dry with a
towel .
4 . Wipe the inside and outside of the unit with a clean, damp cloth . Dry with a towel . (See
“Cleaning and Storage” on page 12 for details .)
CAUTION: Never wash or submerge the unit in water .
Preparing for Use
1 . Make sure the air fryer unit and the accessories
are clean and dry . (See “Cleaning and Storage” on
page 12 for details .)
2 . Place the unit on a stable, level, heat-resistant
surface, away from areas that can be damaged by
steam (such as walls or cupboards) .
3 .
Leave at least 4 inches (10 cm) of space behind, on
the sides, and above the unit .
4 . Do not place anything on top of the air fryer .
Air Frying
1 . Plug the air fryer into a power outlet . The unit will beep and the indicators on the control
panel will flash .
2 . Press the START/PAUSE knob to turn the air fryer on . The unit will beep and all indicators
on the control panel will illuminate .
3 . Select the cooking temperature and cooking time by using either the preset settings or
manual settings .
NOTE:
It is recommended you start with a preset setting and then, if needed, manually
adjust the temperature or time .
‒ Preset Settings
‒ Rotate the START/PAUSE knob to
select the desired preset setting . The preset indicator
will illuminate . The display will show the default
temperature and cooking time for that setting . The
defaults can be manually adjusted .
‒ Manual Settings ‒ Press the TEMP/TIME knob to select
temperature (°F) or time (MIN) to adjust . Rotate the TEMP/
TIME knob clockwise to increase the cooking temperature/
time . Rotate the TEMP/TIME knob counterclockwise to
decrease the cooking temperature/time . The display will
show the current temperature and time setting .
NOTE:
When the Dehydrate function is selected, the time display shows 2 hours .
Dehydrate time can be manually adjusted lower in 1-minute increments until
it reaches 10 minutes (its lowest time setting) . If dehydrate time is manually
adjusted higher than 2 hours, the time will advance in 1-hour increments until it
reaches 9 hours (its maximum time setting) .