KOBE RA9230SQB, Installation Instructions And Operation Manual

Page: 14 / 68

11
To Replace Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
NOTE: DO NOT TOUCH HALOGEN LIGHT WITH BARE HANDS, WHICH MIGHT CAUSE
OVER HEAT AND SHORTEN THE LIFT OF LIGHT BULBS.
   
1. Make sure all controls are OFF, and range hood is unplugged.
2. Place the flat-head screwdriver into the groove between the halogen light glass covering
and the housing

.
3. Gently separate glass covering from the housing

.
4. Gently pull out the defective light bulb

and discard. Light bulbs should be 12V 20W
maximum.
5. Wear a glove or use a cloth to hold the new light bulb and push securely into light
socket. NOTE: DO NOT PUSH TOO HARD OR YOU MAY BREAK THE BULB
CONNECTOR.
6. Put back halogen light glass cover

.
7. Plug back power cord and turn on range hood to test for operation.