Duct Cover Installation
6.
Slide the inner duct cover up and secure with four (4x8 mm) screws (provided) to the upper
telescopic stack. Refer to Figure 5.
Hood Installation
7.
Slide outer duct cover up and place 4 temporary screws to hold the duct cover. Refer to Figure 6.
8.
Install the hood using eight (3/16x3/8 mm) screws (provided) to secure hood to telescopic stack.
Make sure to tighten screws securely. Refer to Figure 7.
Figure 5 Figure 6
Figure 8
Figure 7
9
