KOBE IS2336SQ, Installation Instructions And Operation Manual, Page: 14 / 74

12
To Replace Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
NOTE: DO NOT TOUCH HALOGEN LIGHT WITH BARE HANDS, WHICH MIGHT CAUSE OVER
HEAT AND SHORTEN THE LIFT OF LIGHT BULBS.
1. Make sure all controls are off, and range hood is unplugged.
2. Place the flat-headed screwdriver into the groove of the halogen light glass covering and the
housing.
c
3. Pop out the halogen light glass covering.
d
4. Gently pull out the defective light bulb and discard. Light bulbs should be 12V 20W maximum.
e
5. Using a cloth, hold the new light bulb and push securely into light socket.
6. Return halogen light glass cover to the housing.
f
7. Turn range hood ON to test for operation.
www.goedekers.com