KOBE FrameXX HOME/2, User Manual

Page: 23 / 53

FrameXX User Manual v. 3.2
23
It enables/disables monitoring in CONTROL cloud.
When unchecked, device does not appear in CONTROL.
Remote control
It allows remote control of the device from CONTROL cloud. Level of
remote control depends on current CONTROL license ( Free or Pro ).
Remote control settings
FTP server
This remote FTP server is used for CONTROL cloud file and playlist
storage.
If default, then the device is controlled via system FTP account.
Default FTP server settings support only the device remote control. It does
not support file operation, therefore it is not possible to use dedicated FTP
storage space and Playlist creator wizard cannot work.
We strongly recommend that you use your own dedicated FTP server to
enhance operation security and consequently, open access with any
standard FTP client for handling of files.
Note: FTP server and the following credentials must correspond to the
CONTROL cloud account settings !
Selected FTP server must allow simultaneous access for the number of
users (best is without limitation ), some basic public FTP servers do limit to
concurrent connection for 1-3 users which cannot work with frameXX
devices.
FTP user / FTP password
Credentials for remote FTP server.
If server is Default, then keep this untouched (default)
Remote control interval
There is a delay between two consecutive device controls on CONTROL
cloud if any new command has been left for the device by the user.
Default is 20 sec, after setting up the device communication with
CONTROL cloud, it is recommended to increase the interval (to lower
server load).
Include files and folders
A control XML file generated by the device for remote communication with
CONTROL cloud will contain full file listing of all local storage locations
(Memory, USB, SD). It can heavily increase data traffic (due to high number
files and folders). However it allows, to remotely select any file(s) or folder(s)
to be started, deleted, etc...