KOBE CH2730SQB, Installation Instructions And Operation Manual

Page: 20 / 102

18
OPERATING INSTRUCTIONS
This KOBE hood is equipped with four electronic controls with a 10-second standby startup &
30-second delay shutoff, two powerful centrifugal turbine impellers with safety screens, two
bright 12-volt 20-watt halogen lights, and four oil containers or baffle filters.
The four electronic controls are Light Control, Speed Control A (cycles through Low, Medium,
High, QuietMode
¥
), Speed Control B (cycles through Low, QuietMode
¥
, High, Medium) and
the Power Control (On/Off). Refer to Figure 30.
Figure 30
Turn On:
- Press Power Control (On/Off) button once. (If any Control button is not pressed
within 10 seconds, power will be automatically turned off).
- The KOBE hood will start on Low speed. Each press of the Speed Control button
will cycle through the various speeds.
- Press Speed Control A button to cycle from Low, Medium, High, or QuietMode
¥
.
Press Speed Control B button to cycle from Low, QuietMode
¥
, High or Medium.
- Press Light Control button to turn halogen light on.
Turn Off:
- Press Power Control (On/Off) button once, panel lights will flash and power will be
completely shut off after 30 seconds.
OR
- Press Power Control (On/Off) button twice, all power will be shut off immediately.
- If only the lights are on, pressing Power Control (On/Off) button once will turn power
off after 30 seconds.
Speed Control A
(Cycles through Low, Medium, High,
Q i tM d
)
Power Control
Speed Control B
(Cycles through Low, QuietMode
•
, High,
Medium)
Light
Control