15
To Replace Light Bulb
CAUTION:
HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
1. Make sure all controls are off, and range hood is unplugged.
2. Place a flat-head screwdriver between light cover and housing
to remove cover
.
3. Gently pull defective bulb straight out
and discard. Light bulbs should be 12V 20W
maximum.
4. Wear a cotton glove or use a cloth to handle the replacement bulb (do not handle with
bare fingers as this may shorten the life of the bulb). Push gently but securely into light
socket. NOTE: DO NOT PUSH TOO HARD AS BULB “LEGS” MAY BREAK OFF.
5. Replace light cover
.
6. Turn range hood ON to test for operation.
Summary of Contents for CH0130SQB
Page 2: ......
Page 30: ...27 CIRCUIT DIAGRAM MODEL NO CH0130SQB CH0136SQB...
