5
WARNING
：
IMPORTANT SAFETY INSTRUCTIONS
SAFETY INFORMATION
Read and understand all instructions before using this product. Failure to follow all instructions listed
below may result in electric shock, fire, and/or serious personal injury.
The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
• To disconnect, turn all controls to the off (″O″) position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Unplug from outlet when not in use and before servicing or cleaning.
• Do not operate any product with a damaged (cord or) plug, or after the product malfunctions or is
dropped or damaged in any manner. Return product to the nearest authorized service facility for
examination, repair, or electrical or mechanical adjustment.
• Use only extension cords which have plugs and receptacles which accept the product’s plug.
Replace damaged extension cords.
• Make sure your extension cord is in good condition. When using an extension cord, be sure to use
one heavy enough to carry the current your product will draw. An undersized extension cord will
cause a drop in line voltage resulting in loss of power and overheating. The table on the next page
shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt,
use the next heavier gauge. The smaller the gage number, the heavier the cord.
• Don’t Abuse Cord – Never carry product by cord or yank it to disconnect from receptacle. Keep cord
from heat, oil, and sharp edges.
• Disconnect the product from the power supply when not in use, before servicing, when changing
bulbs (lamp), cleaning, and similar actions.
• Do not insert foreign objects into this product.
• Servicing of a product requires extreme care and knowledge of the system, and should be done
only by qualified service personnel. Replacement parts for a product must be identical to those
parts in the product.
• If operating a product in a damp location is unavoidable, then the product should only be connected
to a circuit that is protected by a ground-fault circuit-interrupter (GFCI). Use of a GFCI reduces the
risk of electric shock.
• Store product indoors when not in use.
• Keep out of reach of children.
• Do not clean this product with a water spray or the like. Follow manufacturers cleaning instructions.
• Avoid direct eye exposure. Do not direct the light beam at persons or animals and do not stare into
the light beam yourself (not even from a distance). The work light can cause flash blindness.
• Do not use the work light in road traffic. The cordless work light is not approved for illumination in
road traffic.
• Disconnect the battery pack from the work light before making any adjustments, changing
accessories, or storing power tools, etc.
• Do not permit children to use the work light; it is not a toy. Children can unintentionally blind
themselves or other persons.
• Recharge only with the battery charger specified by the manufacturer. A battery charger that is
suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use only with specifically designated battery packs. Use of any other battery packs may create a
risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects like paper clips, coins,
