Kobalt KHB 300-06 User Instructions Download Page 7

7

kobalttools.com

SAFETY INFORMATION

•  Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the 

risk of serious personal injury, never use any cordless product in the presence of open flame. An 

exploded battery can propel debris and chemicals. If exposed, flush with water immediately.

•  Do not crush, drop or damage battery. Do not use a battery or charger that has been dropped or 

received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped 

or damaged battery immediately.

•  Exercise care in handling batteries in order not to short the battery with conducting materials such 

as rings, bracelets, and keys. The battery or conductor may overheat and cause burns. Do not 

open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the 

eyes or skin. It may be toxic if swallowed.

•  For best results, your battery tool should be charged in a location where the temperature is more 

than 50°F but less than 100°F. To reduce the risk of serious personal injury, do not store outside 

or in vehicles.

•  Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in 

contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or 

vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek 

immediate medical attention. Following this rule will reduce the risk of serious personal injury.

•  If the power supply cord is damaged, it must be replaced only by the manufacturer or by an au-

thorized service center to avoid risk.

•  Do not point the blower nozzle in the direction of people or pets.

•  Never run the unit without the proper equipment attached. Always ensure the sweeper tubes are 

installed.

•  When not in use, blower should be stored indoors in a dry, locked up place-out of the reach of 

children.

•  Maintain tool with care. Keep fan area clean for best and safest performance. Follow instructions 

for proper maintenance. Do not attempt to clear clogs from tool without first removing the battery.

•  To reduce the risk of electrical shock, do not expose to rain, do not use on wet surfaces. Store 

indoors.

•  Save these instructions. Refer to them frequently and use them to instruct others who may use 

this power tool. If you loan someone this power tool, loan them these instructions also.

Child Safety

Tragic accidents can occur if the operator is not aware of the presence of children.

•  Keep children out of the working area and under the watchful care of a responsible adult.

•  Do not allow children under the age of 14 to operate this blower. Children who are 14 years of 

age and older must read and understand the operating instructions and safety rules in this manu-

al and must be trained and supervised by a parent.

•  Stay alert and turn the blower off if a child or any other person enters the working area.

•  Use extreme care when approaching blind corners, doorways, shrubs, trees, or other objects that 

may obscure your view of a child who may run into the path of the blower.

Summary of Contents for KHB 300-06













Reviews: