10
kobalttools.com
DRIVER FEATURES
1. Depress the On/Off switch (C) to start and
release it to stop your driver. The LED light (B)
will turn on when you press the On/Off switch
&7KH2Q2IIVZLWFKLV¿WWHGZLWKDEUDNH
function which stops your chuck immediately
when you quickly release the switch. It is also a
variable speed switch that delivers higher speed
and torque with increased trigger pressure.
Speed is controlled by the amount of switch
trigger depression.
WARNING
DO NOT
operate for long periods at low speed
because excess heat will be produced internally.
2. The On/Off switch (C) can be locked in the OFF
position. This helps to reduce the possibility of
accidental starting when not in use. To lock the
On/Off switch, place the forward/reverse rotation
control (F) in the center position.
For drilling and screw driving, use forward
rotation marked “>>” (forward/reverse rotation
control is moved to the left). Only use reverse
rotation marked “<<” (forward/reverse rotation
control is moved to the right) to remove screws
RUUHOHDVHDMDPPHGGULOOELW
WARNING
NEVER
change the direction of rotation when
the chuck is rotating. Wait until it has stopped!
BELT CLIP
1. The belt clip is attached with a small screw.
Simply unscrew the clip to move it to the opposite
side of the drill.
OPERATING INSTRUCTIONS
1
C
B
2
Clockwise
Counterclockwise
Locked
F
1
I
