4
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOLS
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
Wh
Watt Hour
Energy Storage Capacity
Ah
Amp Hour
Current Capacity
~
Alternating Current
Type or a characteristic of current
Class II Construction
Double-insulated construction
RPM
Rotating Speed
Revolutions per minute
/min
Per Minute
Revolutions, strokes, surface speed, orbits, etc., per minute
Wet Conditions Alert
Do not expose to rain or use in damp locations.
Read The Operator’s
Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Safety Alert
Precautions that involve your safety.
Long Hair
Failure to keep long hair away from the air inlet could result
in personal injury.
Loose Clothing
Failure to keep loose clothing from being drawn into air
intake could result in personal injury.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Blower Tubes
Do not operate without tubes in place.
Impeller Blades
Rotating impeller blades can cause severe injury.
The power
Always keep the power cable away from heat sources, oils
or sharp edges. Immediately remove plug from the mains if
the cable is damaged or entangled.
The power
WARNING! Turn the machine OFF and disconnect it from
the power supply before inspecting, cleaning, changing
accessories or conducting any other maintenance task.
