11
OPERATING INSTRUCTIONS
8. Direction-of-Rotation
Selector
(Forward/Center Lock/Reverse)
The direction of bit rotation is reversible and is
controlled by a selector located above the trigger
switch (B). With the impact driver held in the normal
operating position, pointing away from you:
a.
Position the direction-of-rotation selector (D) to
the left of the tool for forward rotation.
b.
Position the direction-of-rotation selector to the
right of the tool for reverse rotation.
c.
Setting the switch in the OFF (center lock)
position helps reduce the possibility of accidental
start-up when not in use.
NOTE:
To prevent gear damage, always allow the
impact driver to come to a complete stop before
changing the direction of rotation.
NOTE:
The impact driver will not run unless the
direction-of-rotation selector is engaged fully to the left
or right.
9. Electric
Brake
To stop the impact driver, release the trigger switch (B) and allow the tool to come to a complete
stop.
The electric brake quickly stops the rotation. This feature engages automatically when you release
the trigger switch.
NOTE:
This impact driver is equipped with an electric brake. When the brake is functioning properly,
sparks may be visible through the vent slots in the housing. This is normal and is the action of the
brake.
8
D
D
