8
SAFETY INFORMATION
•
Keep guards in place and in working order.
•
Don’t Force Power Tool – It will perform better and safer at the rate for which it was designed.
•
Don’t Overreach – Keep proper footing and balance at all times.
•
If the power tool strikes a foreign object, follow these steps:
i) Stop the power tool.
ii) Inspect for damage.
iii) Repair any damage before restarting and operating the power tool.
•
Store Idle Power Tool Indoors – When not in use, power tools should be stored indoors in a dry,
locked-up place out of reach of children.
•
Maintain Power Tools With Care – Follow instructions for lubricating and changing accessories.
•
Allow the power tool to run for a few minutes after clearing snow in order to prevent moving parts
from freezing.
•
Only use identical replacement parts and accessories for this power tool. The use of nonidentical
parts or accessories could lead to serious injury to the user or damage the power tool, and will void
the warranty.
•
Do not pick up the power tool while it is running. The power tool is designed to travel along the
ground.
•
Never allow children to operate a power tool. Keep the area of operation clear of all persons,
particularly small children, and pets.
•
Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks,
wires, bones, and other foreign objects.
•
Stop the blade(s) when crossing gravel drives, walks, or roads.
•
Use only 80-volt Kobalt batteries.
•
Read the operating and service instruction manual carefully. Be thoroughly familiar with the controls
and the proper use of the equipment.
GENERAL SAFETY RULES
•
Verify that the power tool is secure while transporting.
•
Store the power tool in a dry area that will prevent unauthorized use or damage. Keep out of the
reach of children.
•
Keep handles dry, clean, and free of debris. Clean the power tool after each use. Refer to the
Maintenance Section in this manual for more information.
•
If the labels on the power tool become defaced or start to lift off, contact customer service
at 1-866-456-8934.
•
Keep these instructions in a safe place for future reference. Refer to them often and use them to
instruct other users. Anyone who uses this power tool must read these instructions carefully.
•
Maintain the power tool with care. Follow the instructions for lubricating and changing accessories.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assem-
ble the product.
Estimated Assembly Time:
5 minutes
Summary of Contents for 2600503
Page 44: ......