background image

6

SAFETY INFORMATION

Personal Safety
•  Stay alert, watch what you are doing and use common sense when operating 

appliance. Do not use the appliance while tired, upset, or under the influence of 

drugs, alcohol, or medication. 

A moment of inattention while operating appliance may result 

in serious personal injury.

•  Use personal protective equipment. Always wear eye protection. 

Protective equipment 

such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for 

appropriate conditions will reduce personal injuries.

•  Prevent unintentional starting. Ensure the switch is in the off-position before 

connecting to battery pack, picking up or carrying the appliance. 

Carrying appliance 

with your finger on the switch or energizing appliance that have the switch on invites 

accidents.

•  Remove any adjusting key or wrench before turning the appliance on. 

A wrench or a 

key left attached to a rotating part of the appliance may result in personal injury.

•  Do not overreach. Keep proper footing and balance at all times. 

This enables better 

control of the power tool in unexpected situations.

•  Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing 

away from moving parts. 

Loose clothes, jewelry or long hair can be caught in moving parts.

•  If devices are provided for the connection of dust extraction and collection facilities, 

ensure that these are connected and properly used. 

Use of dust collection can reduce 

dust-related hazards.

•  Do not let familiarity gained from frequent use of tools allow you to become 

complacent and ignore tool safety principles. 

A careless action can cause severe injury 

within a faction of a second.

Use and Care
•  Do not force the power tool. Use the correct appliance for your application.

 The 

correct appliance will do the job better and safer at the rate for which it was designed.

•  Do not use the appliance if the switch does not turn it on and off. 

Any appliance that 

cannot be controlled with the switch is dangerous and must be repaired.

•  Disconnect the battery pack from the appliance before making any adjustments, 

changing accessories, or storing appliance.

 Such preventive safety measures reduce 

the risk of starting the appliance accidentally.

•  Store idle appliance out of the reach of children and do not allow persons unfamiliar 

with the appliance or these instructions to operate the appliance. 

Appliances are 

dangerous in the hands of untrained users.

•  Maintain appliance and accessories. Check for misalignment or binding of moving 

parts, breakage of parts and any other condition that may affect the appliance’s 

operation. If damaged, have the appliance repaired before use.

 Many accidents are 

caused by poorly maintained appliance.

•  Use the appliance and accessories etc. in accordance with these instructions, 

taking into account the working conditions and the work to be performed. 

Use of the 

appliance for operations different from those intended could result in a hazardous situation.

•  Keep handles and grasping surfaces dry, clean and free from oil and grease.

 Slippery 

handles and grasping surfaces do not allow for safe handling and control of the appliance in 

unexpected situations.

Summary of Contents for 1176102

































Reviews: