kobalttools.com
3
PRODUCT SPECIFICATIONS
SPECIFICATIONS
1/2 IN
10,000 RPM
450 FT-LB
5.3 SCFM
1/4 IN NPT
3/8 IN
90 PSI
COMPONENT
SQUARE DRIVE
SPEED
MAX. TORQUE
AVERAGE AIR CONSUMPTION
AIR INLET
RECOMMEND AIR HOSE
WORKING PRESSURE
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or maintain this product. If you have any questions,
please call our Customer Service Department at 1-888-3KOBALT,
8 a.m. – 8 p.m., EST, Monday – Friday.
WARNING
WARNING
Improper operation or maintenance of this tool could result in serious injury
and property damage. Read and understand all warnings and operation
instructions before using this tool. When using any tool, basic safety
precautions should always be followed to reduce the risk of personal injury.
Use each tool for its intended function only. Do not use this product in
unsafe work conditions. It is always recommended to keep a fire
extinguisher and first aid kit near work areas.
FAILURE TO OBSERVE AND FOLLOW SAFETY INSTRUCTIONS COULD
RESU IN INJURY OR DEATH.
Some dust created by paint spraying, power sanding, sawing, grinding,
drilling and other related activities is known to the State of California to
cause cancer, birth defects and other reproductive harm. A listing of
chemicals can be obtained from www.oehha.ca.gov under proposition 65.
Some examples of these chemicals are:
Lead from lead based paints
Crystalline silica from bricks, cement and other masonry products
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals, work in a well
ventilated area and wear appropriate/approved safety equipment such as
respirators or dust masks which are specially designed to filter microscopic
particles.