3.9
SCFM
45
PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
@
3.3
SCFM
40
PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
@
2
TABLE OF CONTENTS
Safety Information..........................................................................................3
Compressor Requirements.............................................................................2
Package Contents........................................................................................10
Product Specifications....................................................................................3
Preparation..........................................
Spray Gun Set-Up........................................................................................12
.........................................................11
Assembly Instructions...................................................................................13
Operating Instructions..................................................................................14
Care and Maintenance.................................................................................18
Troubleshooting............................................................................................24
Warranty.......................................................................................................28
COMPRESSOR REQUIREMENTS
IMPORTANT:
To operate correctly, this tool requires airflow of at least 3.9 cubic feet per
minute (SCFM) at 45 pounds per square inch (PSI) at the tool. Check the specifications
of your air compressor to be sure that it can support both the minimum SCFM and PSI
required. The air hose length could affect how much air pressure the tool is actually
receiving. You may need to adjust the air pressure higher on the air regulator to achieve
the max working pressure of 45 PSI.
IMPORTANT:
To operate correctly, this tool requires airflow of at least 3.3 cubic feet per
minute (SCFM) at 40 pounds per square inch (PSI) at the tool. Check the specifications
of your air compressor to be sure that it can support both the minimum SCFM and PSI
required. The air hose length could affect how much air pressure the tool is actually
receiving. You may need to adjust the air pressure higher on the air regulator to achieve
the max working pressure of 40 PSI.
SMALL GRAVITY SPRAY GUN
SIPHON FEED SPRAY GUN
