KDC480/485 QG
Quick Guide
See Reference Manual for more detailed information.
to purchase additional KDCs and accessories.
QG_KDC480/485_20220630 p14
In Always-pairing mode, an application can connect to a KDC without reading a pairing barcode, so the
connection procedure is a little different.
a)
In the KTSync app, tap the Connect icon at the bottom left of the app.
b)
In KTSync, tap “START BLE SCANNING” in th
e top right.
c)
In KTSync, check the list of found devices.
d)
In KTSync, tap the KDC480/485 listed by serial number in brackets followed by [BLE] that matches the
serial number found on the back side of the KDC480/485. The format will look like this,
KDC480/485[xxxxxx] [BLE], where xxxxxx is the serial number.
e)
The KDC480/485 will beep upon connection. Now it is ready to use.
< Fig. 4>
