KDC380 QG
Quick Guide
See Reference Manual for more detailed information.
to purchase additional products and accessories.
QG_KDC380_20220624 p4
2.2
Bluetooth Pairing a KDC380 to your smart device with special barcodes
Bluetooth Profile & Pairing
#1. HID-BLE & Pairing (Android, iOS, Mac)
#2. HID-Windows & Pairing (Windows)
#3. SPP-BLE & Pairing (Android, iOS, Mac, Windows)
a.
Navigate to the Bluetooth setting on the host device and ensure that Bluetooth is both
enabled and searching for devices.
b.
Using the KDC, scan the pairing barcode above that corresponds to your desired
Bluetooth profile. If you are unsure which Bluetooth profile is right for you, please refer
to
•
If you use an Android, iOS, or Mac device and desire an HID connection, then scan
barcode #1 above.
•
If you use a Windows device and desire an HID connection, then scan barcode #2
above.
•
If you desire an SPP connection for any device, then scan barcode #3 above.
c.
In HID or HID Windows Profile, check the list of available Bluetooth devices on your host
device. From the list, select the KDC380 listed by serial number in brackets that matches
the serial number found on the back side of the KDC380. KDC380 will beep upon
connection and
display “B
LE HID
Connected” on its screen
. Now it is ready to use.
d.
In SPP Profile for non-iOS, check the list of available Bluetooth devices on your host
device. From the list, select the KDC380 listed by serial number in brackets that matches
the serial number found on the back side of the KDC 380. KDC380 will beep upon
connection and
display “B
LE SPP
Connected” on its screen
, but you should launch
KTSync or your application and select KDC380 within the application to complete the
connection. Now it is ready to use.