KOAMTAC Fundamentals
Using the KDC Finger Trigger Glove Adaptor
The KDC Finger Trigger Glove Adaptor has three primary functions with a KDC200 (1D laser
scanner) or KDC300 (2D imager scanner).
•
The side-facing connector for the finger trigger cable works for LEFT or RIGHT handed
Finger Trigger Gloves.
•
The secondary side-facing connector for charging is conveniently located. There is no
need to remove the FT cable from the primary side-facing connector.
•
The charging cradle pogo-pins on the bottom (for drop-in) compatibility with KOAMTAC
charging cradle models CC 2X4 & CC 2X1.
koamtac.com
Remove the battery cover screw on the back of
the KDC200/KDC250.KDC300. A longer screw
will be included in your order.
Remove the rubber USB connector cover on
the bottom of your KDC. The cover may be cut
at the smallest hinge point. No damage will
result from cutting this part from your KDC.
Insert the KDC into the adaptor, ensuring the
USB connector is completely engaged in the
USB port of the KDC. Once, attached the screw
hole on the back of the scanner should line up
with the adaptor. Fasten the adaptor to the
KDC with the supplied screw.
